From cca893bdfe7cc014b6785fe88baa46163664e558 Mon Sep 17 00:00:00 2001
From: ben-jaynes <1btjaynes@gmail.com>
Date: Fri, 26 Jun 2026 18:43:29 -0700
Subject: [PATCH] vault backup: 2026-06-26 18:43:29

---
 PCB Design/Music Player/Process.md | 1 +
 1 file changed, 1 insertion(+)

diff --git a/PCB Design/Music Player/Process.md b/PCB Design/Music Player/Process.md
index e88a528..42f7649 100644
--- a/PCB Design/Music Player/Process.md	
+++ b/PCB Design/Music Player/Process.md	
@@ -49,3 +49,4 @@ is used which gives the current limiting resistor needed for a LED. The display
 $$R = \frac{{3.3 - 3.0}}{0.16} = 1.875 \Omega$$
 For a standard value a $2.0  \Omega$ resistor will be used. This may make the display a little bit less bright but won't change it very much.Vs - Vf) / If using the maximum forward voltage:
 ### Backlight Control
+Since this device will be battery-powered and the display is not needed most of the time it needs to be able to be controlled by software by the ESP32-S3. To do this a transistor will be added to the cathode pins to control the backlight with an io pin from the microcontroller. 
\ No newline at end of file