ben/ObsidianVault
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

vault backup: 2026-07-01 16:37:05

Browse Source
This commit is contained in:
ben committed 2026-07-01 16:37:05 -07:00
1 parent 7d0ed1c6a1
commit fdc45e862f
1 file changed
+1 -1
Download Patch File Download Diff File Expand all files Collapse all files
PCB Design/Music Player/Process.md
+1 -1
View File
@@ -39,7 +39,7 @@ Since 3.6V are needed the values of 180K and 1.1M will be used for the feedback
### Layout Considerations ### Layout Considerations
Figure 31 in section 10.2 of the datasheet should be used as an example layout for the regulator Figure 31 in section 10.2 of the datasheet should be used as an example layout for the regulator
It may not be entirely necessary to have this component since the battery charger should keep the output system voltage above a flor of 3.5V, but just in case I will keep it in case something It may not be entirely necessary to have this component since the battery charger should keep the output system voltage above a floor of 3.5V, but just in case I will keep it in case something happens and it drops below this so the LDOs can still operate fully.
## PCM5102A ## PCM5102A
## LCD Selection ## LCD Selection
Initially I was planning to use the [NHD-2.4-240320DA-CTXN](https://www.digikey.com/en/products/detail/newhaven-display-intl/NHD-2-4-240320DA-CTXN/26743729) but I found that it requires 9.0V to drive the back light. Since I am driving this off of a single cell lipo I didn't want to add the additional complexity of another boost converter to get to 9.0V. I was able to find [another very similar display](https://www.digikey.com/en/products/detail/newhaven-display-intl/NHD-2-4-240320AF-CSXP/22204988) that instead uses 3.0V (up to 3.3V) to power the back light. Initially I was planning to use the [NHD-2.4-240320DA-CTXN](https://www.digikey.com/en/products/detail/newhaven-display-intl/NHD-2-4-240320DA-CTXN/26743729) but I found that it requires 9.0V to drive the back light. Since I am driving this off of a single cell lipo I didn't want to add the additional complexity of another boost converter to get to 9.0V. I was able to find [another very similar display](https://www.digikey.com/en/products/detail/newhaven-display-intl/NHD-2-4-240320AF-CSXP/22204988) that instead uses 3.0V (up to 3.3V) to power the back light.